New in this release (v. 1.3 - 2011-05-16) |
- new feature: added option to set
the location of language files
- new feature: added option to export
labels to CSV file
- new feature: added "Start
label" option to allow the printing of labels on a partial
sheet (i.e.: labels can be printed starting with label no. 11).
This is useful when you used 10 labels on a previous job and would
like to use the remaining labels on the current labels sheet.
- new feature: added option to set
the price per source to allow different prices for sources of
the same material but having different lengths.
- new feature: added cutting price
per panel option
- bug fixed: for sources with trims
defined the trims were not accounted correctly in the cost calculation
grid. We fixed this issue by displaying the full panel size in
the cost calculation grid and by adding the trims surface to the
"Waste" column as "scrap".
|
|
|
version 1.2 - 2010-07-24 |
- new feature: added filter function
to the cutting layout section
- new feature: added new optimization
level: "Level 3", for better optimized cutting plans
- new feature: added option to set
material price per source
- new feature: added "Compact
mode" option to display/print a compact version of the cutting
plan
- new feature: added "Creation
date" information for jobs and "Last update" information
for cutting layouts
- new feature: added option to choose
the location where the cutting layout is stored: on network database
or on the local computer (under "Database" tab of the
"Settings" window)
- new feature: added "Auto-Save"
functionality for jobs (under "Database" tab of the
"Settings" window)
- new feature: added functionality
to remember the printer used for labels and for the other areas
of the software. For ex.: if a roll printer is used for labels
and a standard A4/Letter size printer for the cutting layout,
Smart1DCutting will automatically select the correct printer for
the task.
- new feature: added "Column
widths" button to the print preview window that allow the
user to configure the column widths for the printed reports
- bug fixed: the optimization engine
grouped layouts with parts of same sizes but different part number,
description or partcode. This resulted in a smaller number of
cutting layout pages but some of the parts were not visible on
the cutting layout (although they were optimized)
- bug fixed: when pasting fractional
data from an .xls file it happened that the fractional data was
incorrectly displayed as a date value
- bug fixed: the optimization engine
(Level 2) was improved to correct some existing performance issues
- bug fixed: various other minor
bugs fixed
|
|
|
version 1.1 - 2009-05-25 |
- new feature: the cutting layout
can be saved as XML file
- new feature: added filter function
for the jobs grid
- new feature: other various minor
new features and improvements
- bug fixed: when in single job mode,
the panels and parts grids were not reloaded if the language was
changed!
- bug fixed: "Works Cost"
and "Cutting Cost" grids were sometimes displayed incorrectly
in the Cost Calculation preview window
- bug fixed: the page orientation
function from the label styles grid did not changed the printer
page orientation
- bug fixed: various minor bugs were
fixed
|
|